Alkemi Stencil Remover Concentrate 1:20-30 1 litre

Alkemi Stencil Remover Concentrate 1:20-30 1 litre

$42.25

Description

Stencil Remover Concentrate is a non corrosive concentrated product that is diluted with water. This product is used to reclaim stencil making systems such as dual cure and photo-polymer emulsions and capillary films.
Stencil remover concentrates offer screen printers a more sustainable cleaning process, as it reduces the amount of packaging used and reduces the carbon foot print as less product needs to be delivered to the end user over a year.

Mixing of Stencil Remover Concentrate
Mix 1 part Stencil Remover Concentrate as follows:
Stencil Remover Concentrate 1:20/30 - can be diluted with up to 30 parts cold water

Use of Stencil Remover Concentrate
1. Remove all ink residues by applying Screen Wash to both sides of the mesh and work in with a brush.
2. Wash both sides of mesh with water to remove all solvent traces.
3. With a brush, apply Stencil Remover Concentrate liberally to both sides of the mesh.
4. Leave to stand for 3 to 5 minutes while the emulsion coating dissolves. Do not allow Stencil remover Concentrate
to dry onto the screen as this will make the stencil difficult to remove.
5. Wash off the stencil with a strong spray followed by a high pressure gun