Union Ink Low Cure Plastisol are flexible cure opaque inks that prevent heat related defects.
Fabric Types : 100% Polyester and Polyester blends
Mesh Count: 83 to 230t/in
Flash & Cure: Flash 150F, Cure 270F to 320F
For best results, use a print-flash-print technique to ensure sufficient ink deposit on dark fabrics.
For challenging polyester fabrics, use Union Ink Low Cure Barrier Gray or Barrier Black as a base layer to achieve maximum bleed resistance.
Adjust flash cure temperature and dwell time so ink is just dry to touch. Avoid excessive flash temperatures to protect fabric and migration of dyes. Depending on flash unit, a 3-5 second flash is adequate.
Test all print for colour fastness and print durability before starting.
